Configure the Link
into the Operating
System
Verify the Position
of Jumper J2
To configure the
HP-FL PCA
and peripheral drives into the operating system,
refer to your system administrator's manuals and the disk drive manuals. You
may configure the operating system either before or after installation of the
hardware.
The
HP-FL PCA
has a jumper labeled J2. The "M" position is undefined. For
operation, the jumper must be in the "L" position, as shown in figure 2-1.
o
DD
Figure 2·1. Jumper J2 Location and Position
2·2 Installation and Configuration