Retrieving The Foiling Pattern On The Machine - Brother ScanNCut DX Foil Transfer Starter Kit Operation Manual

Retrieving the Foiling Pattern on the Machine

For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.
a
Attach the material (to which the foil is to be applied) to
the low tack adhesive mat, and then load the mat.
• If a highly adhesive mat is used, the material may be damaged
when it is peeled off.
• Attach the material so it does not extend from the attaching
area of the cutting mat.
b
Set the elevation lever on the left side of the machine to
the "2" position.
c
Download the Foil pattern from CanvasWorkspace.
• Good foiling results may be difficult to achieve with extremely
small or complicated patterns.
d
Retrieve the pattern on the cutting machine.
4