Cleaning And Maintenance - Bosch VitaBoost MMBH4 series Instruction Manual

en

Cleaning and maintenance

4. Put the lid with the locking cap in place
and press it firmly.
5. Turn the rotary selector in an
anticlockwise direction as far as it will go
(zero setting).
6. Plug the mains plug into the mains.
Switch on the appliance with the on/off
switch. All LEDs are lit.
7. Press the Shake programme selection
button. The LED on the button lights up.
8. The appliance processes the ingredients
automatically.
9. The appliance ends processing
automatically. All LEDs are lit.
10. Switch off the appliance with the on/off
switch. Disconnect the mains plug.
11. Remove the blender jug. Remove the
lid.
12. Pour the finished fruit smoothie into
glasses.
■ Clean all parts. X "Cleaning and
maintenance" see page 20
Cleaning and maintenance
The appliance and the individual parts used
must be thoroughly cleaned after each use.
W Risk of electric shock!
– Unplug the appliance before cleaning it.
– Never immerse the base unit in liquids
and do not clean in the dishwasher.
– Do not use a steam cleaner.
W Risk of injury!
Do not touch the blender blades with your
bare hands. Use a brush.
Caution!
– Do not use any cleaning agents
containing alcohol or spirits.
– Do not use any sharp, pointed or metal
objects.
– Do not use abrasive cloths or cleaning
agents.
20
Notes:
– Clean all parts immediately after use.
This will prevent residues from drying
on and possibly attacking the plastic
(e.g. essential oils in herbs).
– When processing food such as
carrots, the plastic parts may become
discoloured, but this can be removed
with a few drops of cooking oil.
– To make cleaning the blender jug easier,
remove the cover from the handle and
replace once dry.
In Fig. G, you will find a summary of how to
clean the individual parts.
"Cleaning" programme
For quick and easy cleaning.
■ Attach the empty blender jug on to the
appliance.
■ Fill it with 1.25 litres of warm water and
2 drops of washing-up liquid.
■ Put the lid with the locking cap in place
and press it firmly.
■ Switch the appliance on again and press
the Cleaning programme selection
button.
■ The appliance runs through automatic
pre-cleaning and ends the programme
automatically.
■ Switch off the appliance with the on/off
switch. Disconnect the mains plug.
■ Remove the blender jug, the lid with
locking cap and the cushion pad.
■ Rinse all parts thoroughly and clean
again if necessary.
■ Clean the base unit.