Page 1
Fix FrSky TFRSP and connect it to the transmitter Find a suitable place to fix FrSky TFRSP. We recommend a flat spot where velcro tape can hold firmly, not too far away from the trainer socket of the teacher's radio. Connect the WTC/x to the CPPM port of TFRSP and the radio's trainer port.
Page 2
TFRSP's LED, which indicates the binding process is completed successfully 4. Cycle the power of the teacher's radio 5. The link should be set up and your TFRSP is bound to the student's radio, which is indicated by a constant lit LED of your TFRSP 6.
Page 3
TFRSP is not activated, see the radio's manual on how to activate it Channels are mixed up It is not a mistake of your TFRSP, but may happen if the student’s and teacher’s radios do have a different channel allocation scheme.
Page 4
2011/5/31 ﹡FrSky V8R7SP and D8RSP can be used to set up wireless trainer systems too, along with respective FrSky compatible modules. The module of the student’s radio needs to be replaced by respective FrSky module, with the same set up procedures above.
Need help?
Do you have a question about the TFRSP and is the answer not in the manual?
Questions and answers