Advertisement
Quick Links
1
OUT
2
OUT
Example
To confirm depth
of machined hole
Trimmer Auto Switch
Large work piece
Medium work piece
Small work piece
No work piece
To judge height
• Can be mounted on
of work piece
a standard actuator
D- 7K / D-R K
Series
OUT1 and OUT2 are
adjustable separately
OUT1
Trimmer
Operating range of sensor (LED of sensor is on.)
OUT1
Output ON = Green LED is on.
Large work piece
s w
u t o
o r k
e a
s w
O n
t i n
o w
a l l
d i s
b e
OUT
CAT.ES20-180
OUT2
Detecting range
Adjustable by trimmer
OUT2
Detecting range
Output ON = Orange LED is on.
Adjustable by
trimmer
Medium work piece Small work piece
o
s t
h
i t c
c e
e a
p i e
e d
i s h
g u
2
OUT
1
• Amplifier, two
types of mountin
A
-U
Trimmer
y
s i l
Advertisement
Related Manuals for SMC Networks D-R K Series
Summary of Contents for SMC Networks D-R K Series
- Page 1 Example To confirm depth of machined hole Trimmer Auto Switch Large work piece Medium work piece Small work piece No work piece a l l To judge height • Can be mounted on of work piece a standard actuator CAT.ES20-180...
-
Page 2: Specifications
Trimmer Auto Switch D- 7K/D-R K Sensor unit Direct mounting type Rail mounting type Amplifier unit Internal Circuit Sensor unit D- 7K Vsw (Brown) Switch main circuit GND (Blue) SOUT 1 (Black) Detective sensor SOUT 2 (White) Amplifier unit D-RNK... - Page 3 Air cylinder — D-F7K Sensor unit Air cylinder Model Trimmer Auto Switch D-Y7K Amplifier unit Output (OUT1) indication: green Lights up when OUT1 outputs. OUT1 adjusting trimmer Output (OUT2) indication: orange OUT2 adjusting trimmer Confirmation of detection at...
- Page 4 D- 7K/D-R K Dimensions Sensor unit D-F7K D-Y7K Amplifier unit D-R K D-F7K Most sensitive position ø3.2 D-Y7K 12.5 Most sensitive position M2.5 x 4L D-RNK Connector for sensor e-con 12.5 OUT1 OUT2 3000 3000 2-ø3.5 3000 READY TRIMMER SWITCH...
-
Page 5: Safety Instructions
Trimmer Auto Switch Safety Instructions These safety instructions are intended to prevent a hazardous situation and/o equipment damage. These instructions indicate the level of potential hazard by a label of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe... - Page 6 5. Pay attention to leakage current. Although a varistor for surge protection is connected at the output side of a trimmer auto switch, damage may still occur if the surge is applied repeatedly. When a load, such as a relay, solenoid, which generates surge is directly driven, use a type of switch with a built-in surge absorbing element.
- Page 7 8. Take measures against freezing when operating at 5°C or less.
- Page 8 Trimmer Auto Switch Precautions 3 Be sure to read before handling Wiring Caution 1. Connection and removal of connector • Hold the lever and connector body with two fingers and insert the connector straight into the pin until it is locked with a click sound.
Need help?
Do you have a question about the D-R K Series and is the answer not in the manual?
Questions and answers