Page 2
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC.
Page 3
LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller.
Page 4
SMC price list. Under the limited lifetime warranty, internal and external power supplies, fans, and cables are covered by a standard one-year warranty from date of purchase. SMC Networks, Inc. 38 Tesla Irvine, CA 92618 Warranty in EMEA and Asia Pacific: For details regarding warranty in EMEA and Asia Pacific, please contact your country sales representative.
Page 5
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 6
• Consult the dealer or an experienced radio/TV technician for help EC Conformance Declaration - Class A SMC contact for these products in Europe is: SMC Networks Europe, Edificio Conata II, Calle Fructuós Gelabert 6-8, 2o, 4a, 08970 - Sant Joan Despí, Barcelona, Spain.
+A1: 2001 (80 - 1000 MHz with 1 kHz AM 80% Modulation: 3 V/m) • Electrical fast transient/burst according to EN 61000-4-4:1995 + A1: 2001 (AC/DC power supply: ±1 kV, Data/Signal lines: ±0.5 kV) • Surge immunity test according to EN 61000-4-5:1995 + A1: 2001 (AC/DC Line to Line: ±1 kV, AC/DC Line to Earth: ±2 kV) •...
Page 8
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung vermieden. 12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen.
C. Loading Paper Roll 3. Self Test of the Printer 4. Using the Printer A. Connecting the Mini-POS Ticket Printer to the Wireless Hotspot Gateway B. Configuring the Printer for Ticket Printing 5. Specifications A. Physical Characteristics B. Printer Font C. Print Paper 6.
4) Y Cable 5) Printer Cable 6) Power Adapter (7.5 VDC output) 7) Power Cord 8) Paper Roll 2. Indicators and Connections A. Front Panel of the Printer Power Indicator Error Indicator Feed Button Online Button B. Rear Panel of the Printer...
3. Self Test of the Printer • Power up the printer while pressing and holding down the Online button. Power Indicator comes on and Error Indicator goes out. • Release the Online button. The printer prints out a successful test page.
Figure 3. Fig. 3. Connect Y-cable to Hotspot Gateway serial port. • Using the printer cable provided, as shown in Figure 4, connect the 25-pin cable end of the printer cable to the printer, shown in Figure 5.
• Connect the AC power adapter to the printer's power socket and the other end to the electrical outlet. NOTE: Use of a different adapter may result in product damage. B. Configuring the Wireless Hotspot Gateway and Printer for Ticket Printing Detailed instructions can be found in the EliteConnect 2.4GHz 802.11g...
Print Speed Print Head Interface (Serial) Interface (Parallel) Cash Drawer Port Net Weight Dimensions Operating Environment Power Input B. Printer Font ASCII Character Print Commands C. Print Paper Type Model Number Parameters Direct thermal 57.5 mm ± 0.5 mm 48 mm Approx.
6. Pinouts A. Serial Connection B. Parallel Connection Pin# Signal /STB DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 DATA8 /ACK BUSY /ERR Pin# Signal 18~25...
C. Power Input PRP-058 requires DC 7.5V/2.0A power. D. Cash Drawer Port Pin# Signal Drive Signal Drive Signal DC +12V DC +12V Description Cash drawer drive signal (output) Cash drawer drive signal (output) Output power Output power...
24 dots double density x denotes the data number x=n1+256*n2 when m=01 x=(n1+256*n2)*3 when m=21 Initializes printer and sets all defaults Controls cash drawer n1 is the time for attracting micro-switch n2 is the time for starting next attractive...
Need help?
Do you have a question about the SMCWHS-POS and is the answer not in the manual?
Questions and answers