Power On; Power Off - Fujitsu LifeBook P Series Manual

Power On

Suspend/Resume/Power On button
The Suspend/Resume/Power On button is used
to turn on your LifeBook notebook from its off
state. Once you have connected your AC adapter
or charged the internal Lithium ion Battery, you
can power on your notebook.
When you turn on your LifeBook be sure you
have a power source. This means that at least
one battery is installed and charged, or that
the AC adapter is connected and has power.
Press the Suspend/Resume/Power On button.
When you have finished working on the notebook,
you can either leave it in Suspend mode, or you
can turn it off.
Do not carry your notebook around when it
is still power on. Do not subject your notebook
to shocks or vibrations. These may damage
your notebook.
14
When you Power On your LifeBook notebook, it
will perform a Power On Self Test (POST) to
check the internal parts and configuration. If an
error is found, your LifeBook notebook will emit
an audio warning and/or an error message will
be displayed.
After satisfactory completion of the Power On Self
Test (POST), your notebook will load the
operating system.

Power Off

Power/Suspend/Resume Button
Before turning off the power, check that the Hard
Drive, bay drive, PC Card and the Floppy Disk
Drive Access indicators are all Off. If you turn off
the power while the notebook is accessing the
disk or PC card, data may be lost. To shut down
the notebook with out error, use the Windows
shut down procedure.
Remember to close all files, exit all
applications, and shut down your operating
system prior to turning off the power using
the power switch. If documents are open
when you turn off the power, you will lose data
that have not been saved, and may cause
disk errors.
Remember to use the correct procedure to shut
down your notebook. The proper sequence is:
1. Click the start menu, and then click turn off
Computer button.
2. Click on the Turn Off button within the turn
off computer dialog box.
3. The notebook automatically begins to shut
down.