Download  Print this page

Husqvarna W 40P Workshop Manual page 19

Hide thumbs

Advertisement

Repair instructions
Securely tighten the hose connector on the pump suc-
tion port.
Discharge hose installation (see Figure 3)
Use a commercially available hose (J). Use the hose
connector and the hose clamp provided with the pump.
It is best to use a short, large-diameter hose, because
that will reduce fluid friction and improve pump output.
A long or small-diameter hose will increase fluid friction
and reduce pump output.
Tighten the hose clamp securely (C) to prevent the dis-
charge hose from disconnecting under pressure.
English - 19

Advertisement

Table of Contents
loading

  Also See for Husqvarna W 40P

  Related Manuals for Husqvarna W 40P