PREPARING THE INTERIOR ASSEMBLY
5. UNPACK THE INTERIOR ASSEMBLY
a. Remove the battery cover by sliding the cover upward.
b. Locate the screws holding the Mounting Plate to the Interior Assembly. Remove the
screws to release the Mounting Plate from the Interior Assembly.
6. SET THE ENTRY SWITCH FOR LEFT OR RIGHT HANDED DOOR
a. Gently move the switch to "L" for Left Handed Door (Figure 6a).
b. Gently move the Switch to "R" for Right Handed Door (Figure 6b).
7. SET THE INTERIOR KNOB POSITION FOR LEFT OR RIGHT HAND HINGED DOORS
a. The Interior Knob goes in the Horizontal position for Left Handed Doors (Figure 7a).
b. The Interior Knob goes in the Vertical position for Right Handed Doors (Figure 7b).
NOTE: Make sure deadbolt Latch is retracted
Entry Switch
(Left or Right)
Left Handed Door
(Horizontal)
Right Handed Door
Figure 7a-b
Figure 6a-b
(Vertical)
Page 5