Table of Contents
Advertisement
Change the Month
1. In this example, press CHANGE until the month is "11" (November). Refer to
2. Press SET.
3. The flashing changes from "Month" to "Date".
Change the Date
1. In this example, press CHANGE until the date is "02". Refer to
2. Press SET.
3. The "Ending Date" of the display changes from flashing to steady and the
displayed under "SU".
Set Password
Once the password is set, you must enter it before changing any settings. Refer to
on page
29.
You may choose any 4-digit number from 0001 to 9998.
Numbers "0000" and "9999" are not valid passwords.
All settings must be reset if you forget the password. Refer to
Settings" on page
Example: Set the Password to "1234".
1. Press SELECT until the
ES700 User's Manual
DST
END
SELECT
DST
END
SELECT
30.
is above the "PASSWORD" mark.
CHANGE
SET
SU
CHANGE
SET
DST on page
DST on page
23.
mark is
"Enter Password"
"Reset Factory Default
23.
27
Hide quick links:
Advertisement
Table of Contents
