Fujitsu F2MC-8FX Series Operation Manual page 16

■ Header board specifications
Figure 14 shows recommended dimensions of the header board connected to the MCU board.
Table 11 lists the general specifications of the header board.
Incorrect insertion
prevention guard
MCU board I/F
connector B
Figure 14 Recommended dimensions of the header board (Top view)
MCU board interface connector
Incorrect insertion prevention guard
Spacing between the MCU and header boards when engaged Approx. 5.0mm
■ Connector socket specifications
The specifications of a connector and a socket is shown in Table 12.
Header board interface connector Connects the MCU board to the header board.
BGM adapter connector
Main clock mounting socket
Sub clock mounting socket
12
2 1
120 119
30mm
40mm
Table 11 General specifications of the header board.
Item
Table 12 Connector and socket specifications
Item
20mm
13mm
2 1
120 119
120 pin 0.5mm pitch 2 piece connector (Straight) × 2
Model number: WR-120SB-VF-N1
(Japan Aviation Electronics Industry, Limited)
2 pin SIP socket
Model number: PCW-3-1-1PW (MAC EIGHT)
Connects the MCU board to the BGM adapter.
Mounts the main clock crystal oscillator.
Mounts the sub clock crystal oscillator.
MCU board I/F
connector A
Description
Description