1.0 Product Description 1.1 Introduction The Model 2102 is a dual Channel Gas Alarm Panel housed in a NEMA 12, JIC type enclosure. The unit provides DC power for two SMC fixed installation gas monitors of the 200x or 20x series and also provides tow individual relays for activation of remote devices such as alarms, lights or fans.
1.2 Configuration The Model 2102 is available with or without a built in audible alarm at the controller: Model 2102-00: Standard Controller. Model 2102-01: Controller with audible alarm annunciator (common to both gas monitors) installed in the enclosure door. The standard controller is provided with the relays configured for separate activation their...
Page 6
Terminal 1: Normally open: Connects to Commons during alarm. Terminal 2: Common. Terminal 3: Normally connected to Common: Opens during alarm. Connect the 120 VAC power source to the large terminal strip marked “N” “G” “H” for Neutral, Ground, Hot. Install the protective plate which is provided with the Model 2102 over the AC Connection for safety.
3.0 Specifications Enclosure NEMA 3, JIC Type Operating Temperature C to +45 Input Power 120 VAC, 50-60 Hz 240 VAC available Fuse ¼ Ampere Size 8.3 x 8.3 x 4.4 in (HWD) (20.0 x 20.0 x 10.0 cm) Output Voltage 9 –...
4.0 Warranty SIERRA MONITOR CORPORATION warrants its products to be free from defects in workmanship or material under normal use and service for two years after date of shipment. SMC will repair or replace without charge any equipment found to be defective during the warranty period.
Need help?
Do you have a question about the Gas Alarm Panel 2102 and is the answer not in the manual?
Questions and answers