Installation Instructions Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general out- line for installation. If you have unique requirements, please contact Giant Industries, Inc. or your local distributor for assistance.
Page 4
Weep Return Ring 01010 Screw 06486 Support Ring 01011-0400 Spring Washer 06487 O-Ring 05290 Bearing Cover Open 06488 Valve Casing (P460/P480) 1 05291 Bearing Cover Closed 05939 Valve Casing (P414) 05292 Shim 05543 Valve Assy. 05293 Shim (Includes items 27-31)
Page 5
Exploded View - P460A/P480 P460A/P480/P414 REPAIR KITS Plunger Packing Kits Oil Seal Kit Part # 09499 Part # 09306 Item Part # Description Qty. Item Part # Description Qty. 07266 O-Ring 08366 Oil Seal 06483 Grooved Seal Packing 13036 Spacer Ring...
Page 6
(20) 180 , so that the leakage holes are underneath. Oil dipstick (2) and oil drain plug (58) have to be inter- changed and crankcase cover turned by 180 Contact Giant Industries for service school information. Phone: (419) 531-4600...
Page 8
A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required prior to the return to Giant Industries of all prod- ucts under warranty consideration. Call (419)-531-4600 or fax (419)-531-6836 to obtain an R.G.A.