Table of Contents
Advertisement
10.2 Type Designation Magnetic Tape
MB20
Bezeichnung:
MB20 = Incremental magnetic tape
Basic pole pitch:
20
= 2 mm pole pitch
Tape Widht in mm:
10
= 10 mm
Number of Tracks:
Number of tracks
1
= Single track system
2
= Dual track system (necessary for reference pulse)
Tape Structure:
R
= Standard: Magnetic tape on interference band
(glued with adhesive tape on the interference band side
and glued cover tape (supplied)
Options:
B
= Without adhesive tape on the interference band side
C
= Without supplied cover tape
D
= Without adhesive tape and cover tape (B+C)
Additional Information:
REF 0154 = Reference pulse after 154 mm
BK80
= 8 mm magnetized plastic tape on a 10 mm carrier tape
EPS
= single pole mangetized (necessary with a resolution of ≤ 1 µm!)
NOTE
When ordering, please use the here described ordering code (Type Designation).
Options that are not required are filled in with „-„.
10.2.1 Ordering Examples for Magnetic Tape
MB20-20-10-1-R-EPS (standard)
Magnetic tape with 2 mm pole pitch, 10 mm wide, single track system, bonded with interference material.
With single-pole magnetization (required for high sensor-resolutions from 1 µm on).
MB20-20-10-1-R (standard)
Magnetic tape with 2 mm pole pitch, 10 mm wide, single track system, bonded with interference material.
Without single-pole magnetization (suitable for sensor-resolutions coarser than 1 µm, e.g. 0.005 mm).
MB20-20-10-2-R-D-BK80-REF0154
Magnetic tape with 2 mm pole pitch, 10 mm wide, dual track system, standard: magnetic tape bonded with
interference material, without adhesive tape and cover band, 8 mm plastic tape on a 10 mm carrier tape, single
reference pulse 154 mm from the right side (cable output right). Without single-pole magnetization (suitable for
sensor-resolutions coarser than 1 µm, e.g. 0.005 mm).
20
BB
- 25 -
C
D
Type Designation
E
FFFFFFF
Advertisement
Table of Contents
