Download  Print this page

Checking Shock And Tilt Indicators - Siemens SINAMICS SM120 Operating Instructions Manual

Control module.
Hide thumbs


Preparations for use
4.2 Inspections when the equipment is received

Checking shock and tilt indicators

The purpose of shock and tilt indicators
The unit is equipped with shock and tilt indicators to monitor for damage during transit. It is
essential that you check the shock and tilt indicators before commissioning the unit.
Tripped shock and tilt indicators
Safe operation of the device is not guaranteed if the shock or tilt indicator has tripped
This can result in death, serious injury or material damage.
● If one of the indicators has tripped, do not perform any commissioning.
● Inform the Technical Support. Only specialist Siemens technicians can recommend
See also
Siemens Industry Online Support (Page 101)
appropriate measures.
Operating Instructions 07/2015


Table of Contents

   Also See for Siemens SINAMICS SM120

   Related Manuals for Siemens SINAMICS SM120

Comments to this Manuals

Symbols: 0
Latest comments: