Download  Print this page

Industrial Security Concept - Siemens SINAMICS SM120 Operating Instructions Manual

Control module.
Hide thumbs

Advertisement

Safety instructions
2.6 Information for persons responsible for plants and systems
● System configuration is carried out by an experienced system integrator. Further system
● The drive is only operated in conjunction with the engineered components.
● Different operating modes, overloads, load cycles, and differing environmental conditions
Note
Make use of the support and services offered by the relevant service center for planning,
installation, commissioning, and servicing work. You can find the relevant contact person under
"Service & Support (Page 101)".
2.6.2

Industrial security concept

Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, devices, and/or networks. They are important
components in a holistic industrial security concept. The products and solutions from Siemens
are continuously developed with this aspect in mind. Siemens strongly recommends that you
regularly check for product updates.
To ensure that Siemens products and solutions are operated securely, suitable preventive
measures (e.g. cell protection concept) must be taken and each component must be integrated
into a state-of-the-art holistic industrial security concept. Any third-party products used must
also be taken into account. For more information about industrial security, visit http://
www.siemens.com/industrialsecurity (http://www.siemens.com/industrialsecurity)
To receive information about product updates on a regular basis, subscribe to our product
newsletter. For more information, visit http://support.automation.siemens.com
support.automation.siemens.com)
20
components such as the circuit-breaker, transformer, cables, and motor are adjusted for
drive operation.
are permitted only after special arrangement with the manufacturer.
(http://
SINAMICS SM120 6SL38715
Operating Instructions 07/2015

Advertisement

Table of Contents

   Also See for Siemens SINAMICS SM120

   Related Manuals for Siemens SINAMICS SM120

Comments to this Manuals

Symbols: 0
Latest comments: