Electromagnetic fields can cause data loss to magnetic or electronic data storage media.
Therefore, do not carry magnetic or electronic data storage media with you.
For nominated persons in control of an electrical installation, you can find further information
on electromagnetic fields under "Information for nominated persons in control of an electrical
Information for persons responsible for plants and systems (Page 19)
Components that can be destroyed by electrostatic discharge (ESD)
Electronic components can be destroyed in the event of improper handling, transporting,
storage, and shipping.
Pack the electronic components in appropriate ESD packaging; e.g. ESD foam, ESD
packaging bags and ESD transport containers.
To protect your equipment against damage, follow the instructions given below.
● Avoid physical contact with electronic components. If it is essential that you perform work
● Do not place electronic components close to data terminals, monitors or televisions.
● Electronic components should not be brought into contact with electrically insulating
SINAMICS SM120 6SL38715
Operating Instructions 07/2015
2.5 Components that can be destroyed by electrostatic discharge (ESD)
on these components, then you must wear one of the following pieces of protective gear:
– Grounded ESD wrist strap
– ESD shoes or ESD shoe grounding strips if there is also an ESD floor.
Maintain a minimum clearance to the screen (> 10 cm).
materials such as plastic foil, plastic parts, insulating table supports or clothing made of