Technical Data And Drawings; Standards And Regulations; Environmental Conditions; Table B-1 Standards And Regulations - Siemens SINAMICS SM120 Operating Instructions Manual

Technical data and drawings

B.1

Standards and regulations

Standards and regulations
Table B-1
Standards
EU Directives
Insulation
Protection class
Touch protection
Emitted interference
B.2

Environmental conditions

Climatic environmental conditions
Table B-2 Climatic environmental conditions
Ambient temperature
Relative humidity
SINAMICS SM120 6SL38715
Operating Instructions 07/2015
Standards and regulations
Standards and regulations
DIN EN 61800-5-1/VDE 0160 T105 (IEC 61800-5-1)
DIN EN 61800-3/VDE 0160 T103 (IEC 61800-3)
DIN EN 61800-4/VDE 0160 T104 (IEC 61800-4), however, only when refer‐
enced in the standards DIN EN 61800-3 or DIN EN 61800-5-1
DIN EN 60204-11/VDE 0113 T11 (IEC 60204-11)
2006/95/EC + amendments (Low Voltage Directive)
2004/108/EC + amendments (Electromagnetic Compatibility)
According to DIN EN 50178/VDE 0160 (IEC 62103), IEC 61800-5-1:
Pollution degree 2 (without conductive pollution), non-condensing
Class 1 according to DIN EN 61800-5-1/VDE 0160 T105 (IEC 61800-5-1)
DIN EN 50274/VDE 0660 T514 and BGV A3 when used for the intended
application
This drive unit is part of a PDS, Category C4 according to DIN EN 61800-3/
VDE 0160 T103 (IEC 61800-3). The drive unit has not been designed to be
connected to the public line supply. The equipment can cause electromag‐
netic interference when it is connected to the public network. The essential
requirements placed on EMC protection for the drive system should be se‐
cured using an EMC plan at the customer site.
Storage with suitable packag‐
ing
-25° C to +70° C
5% to 95%
(Only low condensation is
permitted. The drive must be
completely dry before com‐
missioning.)
Transport with suitable pack‐
aging
-25° C to +70° C
5% to 75%
B
Operation (industrial)
5° C to +40° C
5% to 85%
(Condensation is not permit‐
ted)
103