SmartPool SunHeater S421 Installation & Operation Manual

Swimming pool solar heating system for aboveground pools
Hide thumbs Also See for SunHeater S421:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION &
OPERATION MANUAL
How Solar Pool Heating Works
• Using your pool pump, water
is automatically pumped
through the solar collectors.
• The water is then heated by the
sun as it moves through the
collectors.
• The heated water is returned
back to the pool, through
your return lines.
• You enjoy your own
heated pool with no
fuel costs.
PLEASE READ THIS MANUAL CAREFULLY. YOUR ENJOYMENT OF YOUR SOLAR HEATED POOL
a) Solar collectors are often installed on the roofs of buildings. Unless you are very familiar with working
AND YOUR WARRANTY ARE AFFECTED BY HOW YOUR SOLAR HEATING SYSTEM IS INSTALLED
on roofs and have the proper ladders and safety equipment for such work, you should hire someone with
CAUTION:
the necessary experience to do the installation. Failure to observe safe practices on a roof or other elevated
structure may result in falling, leading to serious injury to you.
b) When installing collectors on the ground, do not build a rack support that could allow children access
into the pool.
for Aboveground Pools
Product Number S421/S411
1
Why Solar Heat Works Best
Collector Cross Section
• Water is heated as it moves through the many
tubes in the solar collectors.
• Tube and web design traps heat and catches
light as the sun moves across the sky.
• Tough polypropylene material won't rust, corrode
or scale. Plus, the collector is reversible.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SunHeater S421 and is the answer not in the manual?

Questions and answers

Summary of Contents for SmartPool SunHeater S421

  • Page 1 When installing collectors on the ground, do not build a rack support that could allow children access into the pool. for Aboveground Pools Product Number S421/S411 Why Solar Heat Works Best • Water is heated as it moves through the many tubes in the solar collectors.
  • Page 2 PROVIDE ACCESS TO THE POOL FOR CHILDREN. Each S421 solar box (2 Collectors) will weigh approximately 80 lbs.(36 kg), and each S411 solar box (2 collectors) will weigh 40 lbs. How much will the solar system weigh when filled with water? (18 kg) when filled with water.
  • Page 3 Product # S421/S411 Kit Components SK-42 SunHeater collectors are manufactured with special molds and materials designed to pro- vide you with the most durable, high per- formance solar pool heating system avail- able. Note: during manufacturing certain mechanical incisions are required to com- plete the assembly of the collector (see pho- tos on right).
  • Page 4: System Layout

    SYSTEM LAYOUT Required: • Flathead screwdriver or 5/16" (8 mm) nut driver. • To install your solar heating system you will require 2 hoses - one that will reach from the pool equipment to the collector and one that reaches from the collector back to the pool.
  • Page 5: Installation

    1. Provide an area that is free of any sharp objects with at least 6 hours of full sunlight a day. 2. Remove strap from collectors and unroll them next to each other placing the headers with the serial number labels closest to your pool equipment. 3.
  • Page 6: Operation And Maintenance

    OPERATION & MAINTENANCE Operation 1. The collectors should feel cool to the touch when the sun is shining on them and water is passing through. This means that the heat is being transferred to the water. 2. The water returning to your pool will be a few degrees (3-5 degrees F/2-3 degrees C)) warmer than the pool itself. This is the most efficient way to heat a large body of water like a pool.
  • Page 7: Guide D'installation Et De Fonctionnement

    Dans le cas d'une installation au sol, ne construisez pas de support (bâti) qui risque de donner aux enfants à la piscine. Système de chauffe-eau solaire pour piscines hors sol de pièce : S421/411 L’vantage du système SunHeater L'eau est chauffée en passant dans les multiples tubes du collecteur.
  • Page 8 PLACEZ LE SUPPORT DE FAÇON QU’IL NE PERMETTE PAS AUX ENFANTS D’ACCÉDER À LA PISCINE. Chaque compartiment solaire S421 (deux capteurs) pèsera environ 80 lb (36 kg) et chaque compartiment solaire S411 (deux Quel sera le poids du système solaire une fois rempli d’eau ? capteurs) pèsera environ 40 lb (18 kg) une fois rempli d’eau.
  • Page 9 Produit n° S421/S411 – Composants du nécessaire Nécessaire Qté Article n° SK-42 69003 Nécessaire pour S421/S411 69002 SC150CLMP 60554 SC375HOSE Les capteurs SunHeater sont fabriqués dans des moules et à l’aide de matériaux qui font de ce système de chauffage solaire pour piscine le plus durable et le plus per- formant du marché.
  • Page 10 SCHÉMA DE MONTAGE DU SYSTÈME Matériel nécessaire : • Tournevis à lame plate ou tourne-écrou de 5/16 po (8 mm) • Pour poser le système de chauffage solaire, vous aurez besoin de deux flexibles, l’un allant de l’équipement de la piscine jusqu’au capteur et l’autre allant du capteur à...
  • Page 11 1. Choisissez une zone exempte de tout objet contondant et qui reçoit au moins six heures d’ensoleillement par jour. 2. Retirez les capteurs de leur emballage et déroulez-les les uns à côté des autres en plaçant les collecteurs portant l’étiquette du numéro de série le plus près possible de l’équipement de la piscine. 3.
  • Page 12: Fonctionnement Et Entretien

    FONCTIONNEMENT ET ENTRETIEN Fonctionnement 1. Les capteurs doivent être frais au toucher lorsque le soleil brille et que l’eau circule. Cela signifie que la chaleur est transférée dans l’eau. 2. L’eau qui retourne à la piscine sera plus chaude de quelques degrés (3 à 5 degrés F/ 2 à 3 degrés C) que celle de la piscine. C’est le moyen le plus efficace de chauffer un grand volume d’eau comme celui d’une piscine.
  • Page 13 Al instalar los colectores en el suelo, no construya un bastidor que sirva a los niños como acceso a la piscina. PARA PISCINAS ELEVADAS Número de Producto S421/S411 Por qué la calefacción solar funciona mejor • El agua se calienta a medida que se mueve por los muchos tubos en los colectores solares.
  • Page 14 NO SIRVA A LOS NIÑOS COMO ACCESO A LA PISCINA! Cada caja solar S421 (2 colectores) pesará aproximadamente 80 libras (36 kg), y cada caja solar S411 (2 colectores) pesará 40 ¿Cuánto pesará el sistema solar cuando esté lleno de agua? libras (18 kg) cuando esté...
  • Page 15 Cantidad No. del artículo Kit de sistema para el Producto N o. S421/S411 69003 SK-42 69002 SC150CLMP 60554 SC375HOSE Los colectores SunHeater están fabricados con moldes y materiales especiales diseña- dos para ofrecerle el sistema de alto rendimiento solar más duradero que existe para calentar piscinas.
  • Page 16 DISPOSICIÓN DEL SISTEMA (Caja sencilla) Se requiere: • Un desatornillador de cabeza plana o una llave para tuercas de 5/16 de pulgada (8 mm) • Para instalar su sistema de calefacción necesitará 2 mangueras: una que llegue del equipo de la piscina al colector y otra que regrese del colector a la piscina. DISPOSICIÓN DEL SISTEMA (Dos Cajas) •...
  • Page 17 Escoja una zona donde no haya ningún objeto afilado y que esté expuesta a pleno sol al menos durante 6 horas al día. Quite la correa de los colectores y desenrolle los colectores, poniéndolos uno al lado del otro y colocando los cabezales de manera que las etiquetas de número de serie estén en la posición más próxima al equipo de su piscina.
  • Page 18: Operación Y Mantenimiento

    OPERACIÓN Y MANTENIMIENTO Operación 1. El colector debe estar frío al tacto cuando el sol da sobre el colector y el agua está pasando por él. Esto significa que se está transfiriendo el calor al agua. 2. El agua que vuelve a su piscina estará unos grados (de 3 a 5 grados F/2 a 3 grados C) más caliente que la propia piscina.
  • Page 19 Achten Sie bei der Installation von Solarkollektoren zu ebener Erde darauf, dass Kinder nicht über das Kollektorgestell in den Pool gelangen können. Solar-Heizsystem für Schwimmbecken Produkt Nr. S421/411 Vorteile des Sunheater Kollektor-Querschnitt – tatsächliche Größe • Das Wasser erwärmt sich beim Durchlaufen der zahlreichen Leitungen im Solarkollektor.
  • Page 20: Wichtiger Hinweis

    SIE DIE ENTSPRECHENDE ANLEITUNG. ANDERNFALLS VERLIEREN SIE IHREN GARANTIEANSPRUCH! VORSICHT! POSITIONIEREN SIE DAS GESTELL SO, DASS ES KINDERN Jede S421-Solarbox (2 Kollektoren) wiegt ca. 36 kg, und jede S411-Solarbox (1 Kollektor) wiegt ca. 18 kg, wenn sie mit Wasser Welches Gewicht hat das mit Wasser gefüllte Solarsystem? gefüllt sind.
  • Page 21 Produkt-Nr. S421/S411 – Inhalt des Bausatzes Satz Anzahl Art.-Nr. 69003 SK-42 System-Bausatz für S421/S411 69002 SC150CLMP 60554 SC375HOSE Die Herstellung der SunHeater-Kollektoren erfolgt unter Verwendung spezieller Formen und Materialien mit dem Ziel, Ihnen ein besonders langlebiges und leistungsstarkes Solar-Heizsystem für Ihren Pool anbieten zu können.
  • Page 22 SYSTEMANORDNUNG (Einzelbox) Notwendige Voraussetzungen: • Schraubendreher für Senkkopfschrauben oder 5/16 Zoll (8 mm)-Steckschlüssel • Für die Installation Ihres Solar-Heizsystems benötigen Sie zwei Schlauchleitungen – eine, die von der Poolausrüstung zum Kollektor führt, und eine, die vom Kollektor zurück zum Pool führt. SYSTEMANORDNUNG (Zwei Boxen) •...
  • Page 23 [numbered text left of figures 5, 6, 7, 8] Wählen Sie einen Bereich ohne scharfe oder spitze Objekte, der täglich wenigstens 6 Stunden uneingeschränkter Sonneneinstrahlung ausgesetzt ist. Entfernen Sie den Gurt von den Kollektoren und rollen Sie sie nebeneinander so auseinander, dass die Verteilerköpfe mit dem Seriennummer-Etikett zur Poolausrüstung zeigen.
  • Page 24: Betrieb Und Wartung

    Wenn die Schraube nicht fasst oder aus dem Loch weiterhin Wasser austritt, verwenden Sie eine etwas größere Schraube. Diese Reparaturmethode führt zu keiner Beeinträchtigung der Garantieleistung. Bei sorgfältigem Umgang und wintergerechter Wartung werden Sie viele Jahre Freude an Ihren Solarkollektoren haben. Lakewood, NJ 08701 • www.smartpool.com S421 72505...

This manual is also suitable for:

Sunheater s411

Table of Contents