Safety instructions
4
Safety instructions
Danger!
Compressed air!
Risk of serious injury or death through contact with quickly or suddenly escaping compressed air
or through bursting plant components.
Measures
•
Do not exceed the max. operating pressure (see type plate)!
•
Only use pressure-resistant installation material!
•
Make sure that no persons or objects can be hit by emerging compressed
air!
Danger!
Inadmissible operating parameters!
Under-running or exceeding the limit values involves risks for persons and the material, and mal-
function and service failures may occur.
Measures
•
Make sure that the pressure transducer is operated only within the permissible limit values that are indi-
cated on the type plate and in the technical data.
•
Exact compliance with the performance data of the pressure transducer in connection with the case of
application.
•
Carry out service and calibration measures at regular intervals.
Further safety advice
•
During installation and operation, the national regulations and safety instructions in force also need to
be observed.
•
The pressure transducer must not be employed in hazardous areas.
Additional instructions
•
Do not overheat the device!
•
The pressure transducer must not be disassembled!
Caution!
Damage possible!
Using the pressure transducer with corrosive media involves the risk of premature
technical failure.
Measures
•
Only use the device with the media that are listed in the data sheet and in the technical data.
Note:
The resistance at the double permissible max. operating pressure is confirmed.
For further information, please refer to the enclosed technical data sheet.
6
®
METPOINT
SP11