Field Setting Parameters - Samsung HHSM-G500005-1 Installation Manual

1

Field Setting Parameters

Accessing And Adjusting The Field Settings
1. To access the field settings push and hold the down arrow and the set key together until the
display shows "10".
Push the Up
2.
Push the Right
3.
Push the Right
4.
arrows to change this value to the desired one.
Once the value is changed you must push the Set key otherwise the change is not saved. Push
5.
the Set
Push the Left
6.
12, repeat the above process for each parameter that needs to be adjusted.
To move up a level in the menu system (Change from 20 codes to 30 codes) push the Left
7.
arrow until the screen goes back to the inital setting i.e 20. Use the Up arrow to change to 30,
then push the Right
Once you have completed adjusting the parameters, push the Esc key to return to the normal
8.
controller screen.
Remember to push Set every time you set a parameter, otherwise it will not be stored
30
www.jouleuk.co.uk | www.joule.ie
arrow once to change 10 to 20.
arrow once so the screen shows 20-11.
arrow again and the value for 20-11 is shown, use the Up
to save and a swirling line will appear, this indicated that the unit is saving the change.
arrow so that 20-11 flashes, then push the Up
arrow to enter the menu (30-11)
and Down
arrow to change to 20-