Download  Print this page

Joining The Stand And The Monitor; Note - Sony BKM-38H Installation Manual

Controller attachment stand.
Hide thumbs

Advertisement

Table of Contents

Joining the Stand and the Monitor

For BVM series monitors, see " BVM series monitors"
(page 16).
PVM-L2300 monitor
1
Remove two of the screws on the back of the monitor.
2
Fit the front stands of the monitor into the front hole of
the attachment stand.

Note

Protect the monitor from scratches as you carry it
around the plate.
3
Attach the stands to the monitor, using two screws B (4
× 8).
Note
When you fasten screws B to attach the stand to the
monitor, hold the monitor securely against the
mounting surface.
Screw B
4
Plug the connecting cable into the DC 5V OUT and
LAN (10/100) connectors at the side of the monitor.
Note
Be sure to plug the male connector of the cable into the
DC 5V OUT connector on the monitor.
Plug the male
connector into
DC 5V OUT on
the monitor.
DC 5V OUT
connector
LAN (10/100)
connector
15
Assembly

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: