Table of Contents
Advertisement
Safety Precautions
Warning
Take the following precautions to prevent traffic
accidents and avoid personal injury:
•
Installation must be performed according to this
user guide. XACT Communication is not
responsible for issues arising from installations
not performed according to the procedures in
this manual.
•
Do not install the unit where it may obstruct your
view through the windshield or your vehicle's
indicator displays.
•
Do not install the unit where it may hinder the
function of safety devices such as an airbag.
Doing so may prevent the airbag from functioning
properly in the event of an accident.
• The installation and use suggestions contained in
this user guide are subject to any restrictions or
limitations that may be imposed by applicable
law—the purchaser should check applicable law
for any restrictions or limitations before installing
and/or operating this unit.
•
Failure to follow these safety instructions and
warnings may result in a serious accident.
4
Warning
Take the following precautions to prevent fire and
avoid personal injury:
•
To avoid short circuits, never put or leave any
metallic objects (coins, tools, etc.) inside the unit.
•
If the unit emits smoke or unusual odors, turn the
power off immediately and contact Technical
Support at 1-866-466-XACT (9228).
•
Do not drop the unit or subject it to strong
shocks.
•
If the LCD display becomes damaged or broken,
do not touch the liquid crystal fluid. The fluid can
be dangerous to your health. If the liquid crystal
fluid contacts your body or clothing, immediately
wash it off with soap and water.
Caution
Take the following precautions to keep the unit in
proper working order:
•
Be sure the unit is connected to a 12V DC power
supply with a negative ground connection.
•
Do not open the unit.
•
Do not install the unit where it will be exposed to
high levels of humidity, moisture, or dust.
XTR7CK User Guide
Advertisement
Table of Contents
