Your new SIRIUS TTR1 Radio comes with everything you need to enjoy SIRIUS Internet Radio in your home . Use this manual to familiarize yourself with all of your SIRIUS TTR1 Radio features and capabilities . For the latest information about your SIRIUS TTR1 Radio and other SIRIUS products and accessories, visit http://www .sirius .com .
Safety and Care Information IMPORTANT! Always read and understand all the instructions to avoid injury to yourself and/or damage to your device . SIRIUS XM Radio Inc . disclaims all responsibility for damage from data loss due to breakdown, repair, or other causes . • Do not expose to extreme temperatures (above 140ûF or below -4ûF, or above 60ûC or below -20ûC) .
Page 8
Introduction • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat . • Do not defeat the safety purpose of the polarized or grounding type plug . A polarized plug has two blades with one wider than the other .
Introduction SIRIUS TTR1 Radio Functions Power Button (page 26) Turn radio On and Off . BACK Button (page 27) 0-9 Number Buttons (page 26) Set and select Press to return to the channel presets or previous display directly enter channel screen .
Page 11
Snooze/Sleep Timer Button (page 27) Wireless Antenna Mutes the alarm, or sets the sleep timer, for 5, 10, 15, 30, 45, Headphone Connector or 60 minutes . Aux In Connector Rear Compartment Wired Ethernet Connector Line Out Connector...
Introduction Remote Control Power Button Turn radio On and Off . OK Button Press to select channel list and menu items . BACK Button Press to return back to the previous display screen . MENU Button Press to access or exit advanced features and configuration options .
Display Screen When using the SIRIUS TTR1 Radio, information about songs and artists, and radio functions are displayed . Category or Channel List Screen Menu Options Screen SIRIUS 017 Main Display Screen Jam_ON Channel Name Phish Song Title or First Tube...
Installation Introduction The SIRIUS TTR1 Radio allows you to listen to all of the channels on your Premium SIRIUS Internet Radio subscription package using either a wireless Internet connection (Wi-Fi), or using a wired Ethernet connection . You must be subscribed to the Premium SIRIUS Internet Radio service to use the SIRIUS TTR1 Radio .
Step 1: Connect to a Network The Network Wizard feature is the easiest way to connect to a wireless network . It searches for available wireless networks and displays a list of wireless networks found for you to select . However, if your wireless network name (SSID) is hidden, or if your network is DHCP disabled, you’ll have to manually enter the network settings rather than using the Network Wizard .
Page 18
. If you have just turned your SIRIUS TTR1 Radio on for the first time, the SSID screen will already be displayed . Skip ahead to step e .
Page 19
Incorrect key screen is displayed, and you will be prompted to enter the key again . If you are installing your SIRIUS TTR1 Radio for the first time, continue with “Step 2: Enter Your SIRIUS Account Information” on page 23 .
Page 20
Installation If you have previously entered your SIRIUS user name and key into the radio, and had tuned to a channel, the screen will show Connecting . When successfully connected, the Buffering . . . screen will be displayed as the channel information is streamed to the radio . When complete, you are returned to the main display screen and you should hear the audio playing .
Page 21
Connect the other end of the Ethernet cable to your home’s wired network . If you have turned your SIRIUS TTR1 Radio on for the first time, the SSID screen will already be displayed . Skip ahead to step g .
Installation is displayed, check the Ethernet cable connections . If you are installing your SIRIUS TTR1 Radio for the first time, continue with “Step 2: Enter Your SIRIUS Account Information” on page 23 . If you have previously entered your SIRIUS user name and key into the radio, and had tuned to a channel, the screen will show Connecting .
Page 23
Step 2: Enter Your SIRIUS Account Information The SIRIUS TTR1 Radio needs your account user name and password to connect to SIRIUS Internet Radio service . If are not yet subscribed to the SIRIUS Internet Radio service, go to www .sirius .com/siriusinternetradio or call 888-539-7474 to subscribe, and get your user name and password .
Page 24
Installation scroll to highlight OK and press the TUNE knob . You will then be prompted to enter your password . Enter your password in the same way as you entered your user name and then select OK . Note that the password is case sensitive . The radio will attempt to connect to the SIRIUS Internet Radio service .
Using Your SIRIUS TTR1 Radio Navigation Basics Power Button The Power button turns the SIRIUS TTR1 Radio On or Off . Tune Knob The TUNE knob is multifunction— you can turn it clockwise or counter- clockwise, and press it .
Page 27
BACK Button BACK The BACK button returns back to the previously displayed screen . MENU Button MENU Pressing the MENU button from the main display screen accesses the advanced features and configuration options menu, where you can browse the channel categories and channels, and change the radio settings . Pressing it when in the configuration options menu returns the radio to the main display screen .
Page 28
Using Your SIRIUS TTR1 Radio Listening to SIRIUS Internet Radio Tune a Channel: Press MENU . Press the TUNE knob to select Category Tune . Press the TUNE knob to select All Channels to browse through all the channels, or turn the TUNE knob to highlight a category . Press the TUNE knob to select the category .
Page 29
Press the TUNE knob to select Category Tune . Turn the TUNE knob to browse through and highlight a category . Press the TUNE knob to select the category and view the channels in the category . Returning to Main Display Screen When in the advanced features and configuration options menu, pressing MENU will return you to the main display screen .
Using Your SIRIUS TTR1 Radio Direct Tune A channel can be tuned directly by entering the channel number . From the main display screen, press the TUNE button . Use the 0-9 number buttons on the radio or Remote Control to enter the channel number .
Favorite Channels You can assign up to 10 of your favorite channels to a number button (0-9) so you can easily tune them . To assign a favorite channel to a number button: Tune to the channel you want as a favorite .
Using Your SIRIUS TTR1 Radio Alarm Clock Your SIRIUS TTR1 Radio has two alarm clocks which can be configured according to your liking . When the radio is off, and the alarm(s) are on, the times of each alarm are displayed on the screen .
Page 33
The Alarms screen summarizes each alarm clock setting . To configure an alarm, turn the TUNE knob to scroll to and highlight Alarm 1 or Alarm 2 . Press the TUNE knob . Each alarm has 5 configuration options which are summarized in the following table at the beginning of this section .
Using Your SIRIUS TTR1 Radio Snooze When the alarm sounds, pressing the Sleep/Snooze button will silence the alarm for a period of time . After the snooze time elapses, the alarm will sound again . To snooze: Press the Snooze/Sleep button on the top of the radio .
Sleep Timer The sleep timer turns the radio off after a period of time as you fall asleep . The time can be set to turn the radio off after 5, 10, 15, 30, 45, or 60 minutes . To turn the sleep timer On: Press the Snooze/Sleep button on the top of the radio .
Parental locked . To change the parental lock code: The SIRIUS TTR1 Radio has a default lock code of 1111 . The first time you change the lock code, you’ll need to enter this code during the procedure .
Page 37
Turn the TUNE knob to highlight Change lock code . Press the TUNE knob . You will be prompted to enter the original lock code . If this is the first time you are changing the lock code, enter 1111, otherwise enter your existing lock code .
Page 38
Using Your SIRIUS TTR1 Radio Press MENU to exit . To turn Parental control Off: Press and hold the TUNE knob . Lock/Unlock will be highlighted . Press the TUNE knob . You will be prompted to enter your 4-digit lock code . Use the 0-9 number buttons on the radio or Remote Control to enter the lock code .
Page 39
To lock or unlock channels: Press and hold the TUNE knob . Turn the TUNE knob to scroll through the list and highlight Lock channels . Press the TUNE knob . If parental control is On (locked), you will be prompted to enter your 4-digit code, otherwise skip to step 4 .
Page 40
Using Your SIRIUS TTR1 Radio To unlock a channel, highlight a locked channel and press the TUNE knob . The L lock indicator will be removed indicating that the channel is unlocked . Continue to lock or unlock channels until you are done .
Page 41
knob to erase the character . When you have selected all 4 digits of your code, turn the TUNE knob to highlight OK and press the TUNE knob . If you have entered the correct lock code, the channel will begin playing . Once you have unlocked one channel, all locked channels become unlocked and will remain unlocked until you turn the radio Off .
Using Your SIRIUS TTR1 Radio Equalization (EQ) You can adjust the equalization profile of the radio to adjust for room acoustics and your listening pleasure . The profiles for equalization are Flat, Loudness, Bass Boost, Bright, and Vocal Boost .
Page 43
To turn spatialization on or off: Press MENU . Turn the TUNE knob to scroll to and highlight EQ . Press the TUNE knob . Turn the TUNE knob to scroll to and highlight Spatialization . Press the TUNE knob . Turn the TUNE knob to highlight ON or OFF and press the TUNE knob .
Configuring Your SIRIUS TTR1 Radio SIRIUS setup The SIRIUS setup menu option allows you to configure your user name and password for the SIRIUS Internet Radio service . You can also check the status of your connection . If are not yet subscribed to the SIRIUS Internet Radio service, go to www .sirius .com/siriusinternetradio or...
Page 47
Turn the TUNE knob to scroll to and highlight SIRIUS setup . Press the TUNE knob . User name will be highlighted . Press the TUNE knob . Turn the TUNE knob to scroll through the list of characters and highlight each character for your user name .
Page 48
Configuring Your SIRIUS TTR1 Radio Turn the TUNE knob to scroll through the list of characters and highlight each character for your password . The password is case sensitive . Press the TUNE knob to select the highlighted character and move to the next character .
Page 49
Status The Status screen shows the current status of your Premium SIRIUS Internet Radio service, the user name you are using, and the bit rate of your connection . To display the status: Press MENU . Turn the TUNE knob to scroll to and highlight SIRIUS setup .
Configuring Your SIRIUS TTR1 Radio System Setup The System Setup menu option offers the following menu items: SIRIUS AUX in Alarms Alarm 1: Alarm 2: Brightness Clock Setup Set Time/Date Auto Update Time Zone Daylight savings Network Network wizard View Settings...
SIRIUS and AUX in These two menu options select what the radio will play— SIRIUS selects the SIRIUS Internet Radio service to be played, and AUX in selects the auxiliary input to be played . You can connect a CD or MP3 player to the AUX In connector, and listen to it .
Configuring Your SIRIUS TTR1 Radio Alarms Before setting any alarms, refer to “Clock Setup” on page 53 and ensure that the clock is set correctly, i .e ., the Time Zone and Daylight Savings Time are set correctly for your location . Then refer to “Alarm Clock” on page 32 for information about the alarm clocks .
Clock Setup Clock Setup allows you to change the clock settings: • Set Time/Date - Change the time and/ or date . • Auto Update - Synchronize the clock via the Internet Yes or No . Yes is the default and preferred setting .
Configuring Your SIRIUS TTR1 Radio you have finished . To set Auto Update: Press MENU . Turn the TUNE knob to scroll to and highlight System Setup . Press the TUNE knob . Turn the TUNE knob to scroll to and highlight Clock Setup . Press the TUNE knob .
Turn the TUNE knob to scroll to and highlight Time Zone . Press the TUNE knob . Turn the TUNE knob to scroll to and highlight the time zone you are in . Press the TUNE knob . Press MENU to exit . To set daylight savings time: Press MENU .
IMPORTANT! To connect to a wireless network which restricts access by MAC address, the MAC address of the SIRIUS TTR1 Radio must be added to the allowed list of MAC addresses in the access point before connecting . You can find the MAC...
• For connecting to a wireless network, refer to “To connect to a wireless network using the Network Wizard” on page 18 . • For connecting to a wired network, refer to “To connect to a wired network using the Network Wizard:” on page 21 . View settings: View Settings displays information about your network connection, including the type of connection, the status, the radio’s MAC address, and other...
Configuring Your SIRIUS TTR1 Radio Manual Settings: Refer to one the following sections for detailed instructions on using the Manual Settings to connect to a network: • For connecting to a wireless network, refer to “Connect to a Wireless Network Using Manual Settings” on page 66 .
Page 59
Turn the TUNE knob to scroll to and highlight Network . Press the TUNE knob . Turn the TUNE knob to scroll to and highlight Network profile . Press the TUNE knob . The saved wireless network names will be displayed . If you wish to delete a profile, turn the TUNE knob to scroll to and highlight a profile name .
Configuring Your SIRIUS TTR1 Radio Factory reset Factory reset restores the SIRIUS TTR1 Radio to the factory settings . It will erase all the stored network settings, account user name and password, favorite channels, alarm clock settings, lock code, and set all other options back to the factory settings .
. By default, the SIRIUS TTR1 Radio is set to automatically check for updates . If it finds a software update, you’ll be prompted that a new software is available . You can change this setting so the radio will not automatically check for updates .
Configuring Your SIRIUS TTR1 Radio want the radio to check for software updates . Turn the TUNE knob to highlight YES or NO and press the TUNE knob . Press MENU to exit . To force the radio to check for a software update: Press MENU .
Page 63
Updating the software: If you manually force the radio to check for a software update, or the radio automatically finds a software update, and you want to update the software, follow these steps . The Software update screen is displayed . Turn the TUNE knob to highlight YES and press the TUNE knob .
Configuring Your SIRIUS TTR1 Radio When the update is complete, you’ll be prompted to Press OK/Tune to start . Press the TUNE knob . The radio will start with the new software . Info Info displays the software version number, and the Radio ID number .
Appendix: Manual Network Configuration Connecting to a network using the Manual settings requires some knowledge of your network . You’ll need to manually configure your network connection using the Manual Settings or [Manual config] option if your wireless network name (SSID) is hidden, or if your network is DHCP disabled .
Page 67
If you have just turned your SIRIUS TTR1 Radio on for the first time, the SSID screen will already be displayed . Skip ahead to step d . Press MENU and turn the TUNE knob to highlight System Setup .
Page 68
Appendix: Manual Network Configuration iii . Enter the Gateway IP address for the network . iv . Enter the Primary DNS IP address for the network . v . Enter the Secondary DNS IP address for the network, or leave blank if there is none .
Page 69
disabled . Turn the TUNE Knob to highlight your selection and press the TUNE knob . ii . Enter your key (password) . Turn the TUNE knob to scroll through the list of characters and highlight each character . Press the TUNE knob to select the highlighted character and move to the next character .
Page 70
. If not, the Failed to connect screen is displayed . This means that one or more of the settings you entered is incorrect . If you are installing your SIRIUS TTR1 Radio for the first time, continue with “Step 2: Enter Your SIRIUS Account Information” on page 23 .
Page 71
Connect the other end of the Ethernet cable to your home’s wired network . If you have just turned your SIRIUS TTR1 Radio on for the first time, the SSID screen will already be displayed . Skip ahead to step f .
Page 72
Appendix: Manual Network Configuration Turn the TUNE Knob to highlight Wired . Press the TUNE Knob . Will you be using DHCP? Turn the TUNE Knob to highlight DHCP enable or DHCP disable and press the TUNE Knob . If you have selected DHCP disable, enter the following information .
Page 73
. If Waiting for Ethernet is displayed, check the Ethernet cable connections . If you are installing your SIRIUS TTR1 Radio for the first time, continue with “Step 2: Enter Your SIRIUS Account Information” on page 23 .
Troubleshooting Your SIRIUS TTR1 Radio has been designed and built to be trouble-free but if you experience a problem, here’s some troubleshooting hints . You can also call SIRIUS Customer Care at 800-869-5964 . If you see this on the screen:...
Page 77
If you see this on the screen: Waiting for Ethernet Login failed Try this: • The radio is expecting a wired Ethernet connection . Plug an Ethernet wire into your home network, then plug the other end into the Ethernet connection inside the compartment at the rear of the radio .
Page 78
Troubleshooting If you see this on the screen: Failed to connect Stream Closed If this happens: You do not receive the same SIRIUS channels you receive on your Satellite Radio Try this: • The network information you entered is incorrect . Verify and re-enter the information . (Refer to page 17 for a wireless network, or page 21 for a wired network .) • You have entered an incorrect password for a...
Page 79
If this happens: The Network Wizard fails before the radio connects to your network The Network Wizard does not find your wireless network Try this: • Your network has DHCP disabled . You’ll have to manually configure your network connection . (Refer to page 66 for a wireless network, or page 71 for a wired network .) • Your wireless network has a hidden name (SSID) .
Product Specifications Dimensions SIRIUS TTR1 Radio Remote Weight SIRIUS TTR1 Radio Audio Outputs Headphone Line Out Audio Input Aux In 283 mm (W) x 185 mm (H) x 95 mm (D) 11 in (W) X 7 .25 in (H) X 3 . 7 5 in (D) 52 mm (W) x 85 mm (H) x 5 mm (D) 2 in (W) x 3 .3 in (H) x .25 in (D)
Patent and Environmental Information Patent Information It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/ or make available any technology incorporated in this product . Furthermore, the AMBE voice compression software included in this product is protected ®...
Page 84
FCC Statement The user is cautioned that changes or modifications not expressly approved by SIRIUS XM Radio Inc . can void the user’s authority to operate this device . This device complies with Part 15 of the FCC Rules: 1 . This device may not cause harmful interference . 2 .