Table of Contents
Advertisement
Important safety and
1
environmental instructions
1.6 Plug Wiring
The moulded plug on this appliance incorporates a 13 A fuse. Should the
fuse need to be replaced an ASTA approved BS1362 fuse of the same
rating must be used. Do not forget to refit the fuse cover. In the event of
losing the fuse cover, the plug must not to be used until a replacement
fuse cover has been fitted. Colour of the replacement fuse cover must be
the same colour as that visible on the pin face of the plug Fuse covers are
availabe from any good electrical store.
• Fiting a different plug
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals on
your plug, proceed as follows:
• Brown cable = L (Live)
• Blue cable = N (Neutral)
• Green/yellow cable must be connected to ground (E)
With the alternative plugs a 13 A fuse must be fitted either in the plug or
adaptore or in the main fuse box. If in doubt contact a qualified electrician.
Hand Blender/User Manual
line
9 / EN
Advertisement
Table of Contents
