Visionpro Auto-Azan Overview - Honeywell VisionPRO Series User Manual

VisionPRO Auto-Azan Overview
®
After the initial installation process is complete, provided that the correct latitude, longitude
and time zone has been entered, the Honeywell VisionPRO® controller TH8320NR1016/U
will calculate the correct prayer times and will automatically adjust the start times according
to the necessary astronomical calculations and requirements. So, there will be no need to
manually correct the prayer times.
Occasionally for special functions such as Ramadan and Eid Prayers, the override button can
be used to set the thermostat status to occupied mode and the system will continue running
until the override button is disengaged.
Programming the VisionPRO Auto-Azan.
®
If you wish to take advantage of the inbuilt Auto-Azan feature, please note the longitude and
latitude of the site location before initial programming of the device and have the information
ready to enter when prompted.
Proceed with thermostat programming according to the specific application.
1 Enter "Installer setup" mode using the method described in the installation
instructions.
24
33-00074EA—01