Download Print this page

Replacing The Battery - Motorola CLP 446 User Instruction

Hide thumbs Also See for CLP 446:


Instructions Motorola headsets
• It's advisable to clean the headsets after use by using sterile hygienic wipes.
• While cleaning by using the wipes, wipe the earpiece clean and make sure no moisture enters the holes.
This could cause malfunctions.
• If the two-way radio has become too moist during cleaning, then immediately remove the battery and only
put it back when the two-way radio and headset are completely dry again.
Turn off and remove

Replacing the battery

The battery is replaced as shown below.
Clean the two-way radio
with soft wipes.
Do not use before the
two-way radio is
completely dry again.