Download Print this page

Motorola CLP 446 User Instruction page 4

Hide thumbs Also See for CLP 446:


Instructions Motorola headsets
Place headset cable
• Attach the headset by holding the plug of the wire and attaching the two-way radio to it. This prevents the wire
from coiling, which could cause breakage.
• Attach the headset by using a loop, as shown in the picture below. This prevents a twisted wire with chance of
breakage. You turn the belt clip horizontally, which releases the slot, and then you fold a loop of the wire through
the entrance (clasp) and press the wire into the half circle. Make sure that the wire isn't taut.