Download  Print this page

Philips Efficia DFM100 Instructions For Use Manual Page 205

Defibrillator/monitor.
Hide thumbs

Advertisement

Symptoms
Table 56
USB Problems
Symptom

message on display.
You can't save data to the
USB flash drive.
You can't import a
configuration file from the
USB flash drive.

message
on display.


message on display.

technical
alarm.

technical alarm.
Possible Cause
A non-compatible USB
device has been inserted in
the USB port.
The USB flash drive is full.
The flash drive does not
contain a configuration file.
The USB flash drive was
removed during data
transfer.
The configuration file has
become corrupted.
A USB power overload has
been detected at the USB
port.
The configuration file being
imported contains an item
that is not compatible with
the device's current software
version.
Potential Solution
Use only a compatible USB device to store data from
the Efficia DFM100. See
Delete or remove files from the flash drive to free up
space or use a different flash drive.
Save a new configuration file to the flash drive and
re-try.
Re-insert the USB flash drive and re-try.
Save a new configuration file to the flash drive and
re-try.
Turn the device off for 15 seconds. Replace the USB
device. If the problem also occurs with a second USB
device, call for service.
The configuration item in question is ignored. If this
item is critical to your device, re-export a new
configuration file from a device with a similar software
revision and re-try.
17: Troubleshooting
"USB Device"
on page 210.
193

Advertisement

Table of Contents

   Also See for Philips Efficia DFM100

Comments to this Manuals

Symbols: 0
Latest comments: