To change default settings in Configuration Mode:
Enter the configuration password:
Press the Smart Select knob and then use it to select the parameter to be changed. Then press
the Smart Select knob.
Select the sub-menu you want to change, then press the Smart Select knob.
Select the new default option. Press the Smart Select knob to select the highlighted choice.
Once the desired changes have been made, press the
Configuration Main screen. Press the
before saving changes, you are asked if you want to exit without saving the changes.
To export configuration settings to a USB drive:
Confirm you have a USB drive inserted into the USB port and you are in Configuration Mode.
The Efficia DFM100 copies your current configuration to the USB drive.
NOTE: If you already have a configuration stored on the USB drive, exporting another to the USB drive
overwrites the one already on the drive.
To import configuration settings from a USB drive:
Once in Configuration Mode, insert the USB drive with the saved settings into the USB port.
Make any device-specific configuration changes.
Using the Smart Select knob, select the first number and press the Smart Select knob.
Use the Smart Select knob to enter the remaining numbers in the password.
When finished, select
soft key to advance to the next parameter and repeat steps 4-6 to make
soft key to return to normal operating mode. If you press
If you want to save the changes, select
soft key and then exit Configuration Mode.
If you do not want to save the configuration, select
exit Configuration Mode.
soft key and enter the Configuration password.
soft key. The Efficia DFM100 copies the current configuration from the USB
and press the Smart Select knob.
soft key to save the new configuration.
soft key returns you to the previous settings.
soft key resets all settings to factory defaults.
, press the Smart Select knob, press the
soft key to return to the
and press the Smart Select knob to