Download  Print this page

Philips Efficia DFM100 Instructions For Use Manual Page 147

Defibrillator/monitor.
Hide thumbs

Advertisement

Event Summary
Table 29
Event Information (Continued)
Logged Event





/


(low value) (high
value)




(reason)








AwRR


/


(low value) (high
value)

(value, limit)

(value, limit)

(value)

(time)
NBP


(frequency value)


(frequency)


/
Logged when the CO
sensor has not warmed up to operating temperature range.
2
Logged when the CO
sensor is unplugged or the filter line is disconnected.
2
Logged when the CO
sensor is unplugged.
2
Logged when CO
alarms are turned on or off and any subsequent change.
2
Logged when CO
alarms are turned on and when there is a change in alarm limits.
2
If using the Mainstream or Sidestream sensor, logged when the sensor is zeroing.
If using the Mainstream or Sidestream sensor, logged when the sensor needs to be
zeroed.
If using the Mainstream or Sidestream sensor, logged when the sensor zeroing is
complete.
If using the Mainstream or Sidestream sensor, logged when the sensor zeroing failed.
Logged when the CO
sensor has reached its end of life.
2
Logged when the CO
sensor needs servicing.
2
Logged when the CO
sensor detects a kinked or blocked filter line.
2
Logged when the CO
sensor detects the airway adapter is blocked.
2
Logged when the CO
sensor detects that it is over temperature.
2
Logged when the CO
sensor detects its result is out of range.
2
Logged when a non-critical EtCO
Logged when the Efficia DFM100 cannot communicate with the CO
Logged when AwRR alarms are turned on or off and any subsequent change.
Logged when AwRR alarms are turned on and when there is a change in alarm
limits.
Logged when the patient's AwRR value is higher than the configured limit.
Logged when the patient's AwRR value is lower than the configured limit.
Logged when the Apnea alarm is displayed.
Logged when there is a change to the Apnea alarm Limit setting.
Logged when a manual NBP measurement is requested.
Logged when an automatic NBP measurement is requested (including frequency
value).
Logged when an automatic NBP measurement is changed to manual (including
frequency value).
Logged when the NBP frequency is changed.
Logged when NBP alarms are turned on or off and any subsequent change.
13: Data Management
Frequency
error is detected.
2
sensor.
2
135

Advertisement

Table of Contents

   Also See for Philips Efficia DFM100

Comments to this Manuals

Symbols: 0
Latest comments: