Download  Print this page

Changing Spo 2 Alarm Limits; Enabling/disabling Spo 2 Alarms; Pulse Rate Alarms; Changing Pulse Rate Alarm Limits - Philips Efficia DFM100 Instructions For Use Manual

Defibrillator/monitor.
Hide thumbs

Advertisement

Pulse Rate Alarms

Changing SpO
To change the SpO
Press the Smart Select knob.
1
2
Turn the Smart Select knob to highlight
3
Select
Select
4
Turn the Smart Select knob to select the new high limit value then press the Smart Select knob.
5
6
Select the new low limit and press the Smart Select knob.
Enabling/Disabling SpO
To enable/disable SpO
Press the Smart Select knob.
1
2
Turn the Smart Select knob to highlight
Select
3
Select
4
WARNING: Turning alarms off prevents all alarms associated with the SpO
annunciated. If an alarm condition occurs, no alarm indication is announced.
Pulse Rate Alarms
You can turn on/off Pulse Rate alarms in all clinical modes where SpO
alarm limits may be changed during use. Alarms are annunciated if measurements fall outside the
configured limits for high or low pulse rate. All Pulse Rate alarms are categorized as non-latching
alarms, meaning they are automatically removed when their alarm condition no longer exists.
Pulse Rate alarms can be generated for the conditions shown in
appear as alarm messages in the Pulse status area right above the Pulse numeric. There are both audio
and visual alerts. For more information on alarms, see
Table 26
Alarm Message


NOTE: Pulse alarms are off by default except when the Efficia DFM100 enters Pacing Mode.

Changing Pulse Rate Alarm Limits

To change the Pulse high and low alarm limits:
Press the Smart Select knob.
1
Turn the Smart Select knob to highlight
2
Alarm Limits
2
high and low alarm limits:
2

and press the Smart Select knob.

and press the Smart Select knob.
2
alarms:
2

and press the Smart Select knob.


(
) and press the Smart Select knob.
Pulse Rate Alarms
Condition
Pulse value is greater than the
Pulse high alarm limit.
Pulse value is less than the Pulse
low alarm limit.

Alarms

"Alarms"
Type of Alarm
Medium
Priority
Non-Latching
Alarm

10: Monitoring SpO
and press the Smart Select knob.
and press the Smart Select knob.
measurement from being
2
is available. The configured
2
Table
26. Once generated, they
on page 36.
Indication
Yellow alarm message
with audio tone
and press the Smart Select knob.
2
115

Advertisement

Table of Contents

   Also See for Philips Efficia DFM100

Comments to this Manuals

Symbols: 0
Latest comments: