Download  Print this page

Troubleshooting - Philips Efficia DFM100 Instructions For Use Manual

Defibrillator/monitor.
Hide thumbs

Advertisement

8: Pacing
Table 20
Alarm Message














NOTE: Once the reason for the Pacing Stopped alarm has been resolved, that part of the alarm message is
removed from the display. The audio alarm continues. Press the
pacing, remove the remainder of the alarm text from the display and silence the audio alarm.
WARNING: Observe the patient closely while pacing. Heart rate displays and alarms function during pacing but
can be unreliable. Do not rely on the indicated heart rate or heart rate alarms as a measure of the
patient's perfusion status.

Troubleshooting

If your Efficia DFM100 does not operate as expected during pacing, see
Problems"
98
Pacing Alarms
Condition
Pacing has stopped. There has
been a power failure during
pacing.
Pacing has stopped. A pads off
condition has been detected
during pacing.
Pacing has stopped. The Efficia
DFM100 has detected an error
which prevents delivery of pacing
therapy.
Pacing has stopped. The Therapy
cable is disconnected from the
device.
Therapy is disabled due to an
equipment failure.
Pacing has stopped. The primary
ECG lead has become invalid in
Demand Mode pacing.
The actual delivered pace pulse
current is less than the selected
output.
The battery's charge level is low.
on page 186.
Troubleshooting
Type of Alarm
Indication
High Priority
Red Alarm message
Non-Latching
with alarm tone
Alarm

soft key to resume
"Defibrillation and Pacing
.

Advertisement

Table of Contents

   Also See for Philips Efficia DFM100

   Related Manuals for Philips Efficia DFM100

Comments to this Manuals

Symbols: 0
Latest comments: