Operating Instructions - Electrolux EHC644BB User Manual

8 electrolux.com.au

OPERATING INSTRUCTIONS

Switching the appliance on and off
Control panel
Switch on
Touch
Switch off
Touch
IMPORTANT!
After switching on, within approx. 10 seconds a heat
setting or a function must be set, otherwise the appliance
automatically switches itself off.
Setting the heat setting
To set or change the heat setting: touch the control bar
at the correct heat setting or move your finger along the
control bar until you reach the correct heat setting.
IMPORTANT!
The keep warm setting
used to keep food warm.
Switching the outside ring on and off
By switching the outside rings on or off, the effective
heating surface can be matched to the size of the
cookware. There are three indicators on the control panel
that show which rings have been activated.
To activate the inner ring: touch the sensor field.
The left indicator comes on.
To activate the centre ring: touch the same sensor field
again. The middle indicator comes on.
To activate the outer ring: touch the sensor field again.
The right indicator comes on.
To deactivate the outer ring: touch the sensor field until
the indicator goes out.
Ring activation indicators
for 2 seconds
for 2 seconds
lies between and . It is
Display
/
/ none
Pilot light
lights up
goes out