Specifications - Makita HM0871C Instruction Manual

ENGLISH (Original instructions)
1-1. Switch lever
2-1. Adjusting dial
3-1. Power-ON indicator lamp (green)
3-2. Service indicator lamp (red)
4-1. Side grip (auxiliary handle)
5-1. D-sided side handle
5-2. Clamp nut
6-1. Bit shank

SPECIFICATIONS

Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for chiselling work in concrete, brick,
stone and asphalt as well as for driving and compacting
with appropriate accessories.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model HM0871C
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiseling function with side grip
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Explanation of general view
6-2. Bit grease
7-1. Releasing cover
9-1. Releasing cover
10-1. Change ring
14-1. Screws
15-1. Connector
15-2. White
15-3. Black
Model
Overall length
Net weight
Safety class
) : 86 dB(A)
pA
) : 97 dB(A)
WA
value (tri-axial vector
2
) : 8.0 m/s
h,CHeq
2
2
) : 8.0 m/s
h,CHeq
2
HM0871C
466 mm
5.6 kg
ENE045-1
For Model HM0870C
Noise
The typical A-weighted noise level determined according
ENF002-1
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
ENG102-3
Uncertainty (K) : 1.5 m/s
Work mode : chiseling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENG216-2
with another.
sum) The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
ENG306-1
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
4
16-1. Crank cap cover
16-2. Screwdriver
17-1. Grease
18-1. Connector
18-2. White
18-3. Black
HM0870C
-1
1,100 - 2,650 min
449 mm
5.1 kg
II
) : 87 dB(A)
pA
) : 98 dB(A)
WA
Wear ear protection
total value (tri-axial
) : 11.0 m/s
h,CHeq
2
) : 11.5 m/s
h,CHeq
2
ENG102-3
ENG216-2
vector sum)
2
ENG306-1
2
ENG901-1