Left Control Panel - Dell PowerEdge MX7000 Manual

Left control panel

Figure 2. Left control panel - Status LED
Table 4. Left control panel - LED indicator description
Indicator Description
1 System health
2 System
temperature
3 I/O module health
4 Fan health
5 Stack or group
6 LED status bar
7 System ID button
Status
Blinks amber for 2 seconds and is OFF for 1 second when the chassis health has degraded. By
default, the LED is unlit.
Blinks amber for 2 seconds and is OFF for 1 second when a thermal fault exists on the
enclosure. By default, the LED is unlit.
NOTE: A thermal fault includes excessive ambient temp, I/O modules thermal status,
PSU thermal status, and fan status.
Blinks amber for 2 seconds and is OFF for 1 second when an I/O module is faulty. By default
the LED is unlit.
Blinks amber for 2 seconds and is OFF for 1 second when a front or rear mounted fan fails or
has a warning. By default, the LED is unlit.
Indicates that the enclosure is a member of a group.
Indicator status
Solid blue
Blinking blue
Blinking amber
Allows you to identify the system or the installed sleds.
Description
Indicates that the enclosure is healthy.
Indicates that the system ID mode is active.
Indicates that the system is experiencing a fault.
11