Advertisement
IOperation
[1] Turning the power on and off
1) Turning the power on
• Press the "POWER/STOP" right shuttle push switch till the status
LED lights to turn the power on.
When the power is turned on, the flashing of the status LED and the
sounding of a beep notify the user.
2) Turning the power off
• When the BWC's power is on, press the "POWER/STOP" right shut-
tle push switch for over 1 second to turn the power off.
When the power is turned off, the status LED and the sounding of a
beep notify the user.
Memo: Status LED and beep
The flashing of the status LED and the sounding of the beep are
simultaneous and notify the user of the operation performed by their
pattern. For the types of patterns, refer to the "BWC Operation
Manual".
[2] Wireless listening to music on a computer
(AUDIO mode)
1) Before listening to music on computer using the BWC, it is
necessary to connect the computer to the BWC in the AUDIO
mode on the computer. If the BWC is connected to the
computer in the AUDIO mode from the BWC, the BWC is
connected to the last computer connected (*).
R
9
Advertisement
