Installation; Operation - AEG AGE62526NX User Manual

18 www.aeg.com

3. INSTALLATION

WARNING!
Refer to Safety chapters.
3.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
SN
N
ST
T
3.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the

4. OPERATION

4.1 Control panel
Display
1
Temperature warmer button
2
Temperature colder button
3
OK
4
It is possible to change the predefined
sound of buttons by pressing together
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
3.3 Installation of the
appliance and door reversal
1
6 5 4
Mode
5
ON/OFF
6
Mode and Temperature colder button
for some seconds. Change is reversible.
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
3 2