Siemens M55 User Manual page 83

M55 Barracuda fug am, A31008-H6300-A40-1-4A19 (20. May 2003, 16:01)
For GPRS (General Packet Radio
Service)
GPRS settingsSelect.
You can activate GPRS for the profile
and change the settings here. You
can only start to use GPRS once you
have activated GPRS on your phone
(p. 82).
§Edit§ Press.
APN:
Enter service provider
address.
Login name:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS1 / DNS 2:
(optional).
Save settings.
§Save§
Km K
§Menu§ Connectivity
K
Select function.
HTTP profile
Preparation of the phone depends
on current service provider:
• The settings have already been
installed by provider. You can start
immediately.
• Access profiles have already been
set by your provider. Then select
and activate profile.
m Setup
• The access profiles must be set
manually.
If necessary, check with your service
provider for details.
Fax/data mod.
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be
enabled by the service provider.
There are variations in fax and data
reception, depending on the
network. Please ask your service
provider about this.
§Edit§
Rec fax/data
Your service provider has given
you a number for telephoning and a
fax/data number.
The call is signalled by a special
ringtone and the type of call (fax or
data) is displayed.
Now start the communication
program in your PC to receive the
fax/data.
Set the required mode.
83
L