Daily Use - Electrolux EHG6341FOK User Manual

Hide thumbs Also See for EHG6341FOK:
Table of Contents

Advertisement

Available languages

Available languages

3.4 Residual heat indicator

4. DAILY USE

4.1 Activating and deactivating
Touch
deactivate the hob.
4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after
you activate the hob.
• You spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• The hob gets too hot (e.g. when, a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• You use incorrect cookware. The
symbol
zone deactivates automatically after 2
minutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
deactivates. See below.
The relation between heat setting and
times of the function:
, 1 - 2— 6 hours
• 3 - 4 — 5 hours
• 5 — 4 hours
• 6 - 9 — 1.5 hours
WARNING!
There is a risk of burns
from residual heat.
WARNING!
Refer to Safety chapters.
for 1 second to activate or
comes on and the cooking
comes on and the hob
The induction cooking zones make the
heat necessary for cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat of
the cookware.
4.3 The heat setting
Touch
to increase the heat setting.
Touch
to decrease the heat setting.
Touch
and
at the same time to
deactivate the cooking zone.
4.4 Activating and deactivating
the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
Use sensor field:
To activate the outer ring: touch the
sensor field. The indicator comes on.
To deactivate the outer ring: touch the
sensor field until the indicator goes out.
4.5 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
(
until
comes on. Immediately touch
until the correct heat setting comes on.
After 3 seconds
comes on.
To deactivate the function: touch
4.6 Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
ENGLISH
comes on). Touch
.
25

Advertisement

Table of Contents
loading

Table of Contents