Foreword
- Please read this manual carefully before you use this product and retain it
properly for future reference
- If there is any doubt or difficulty in the process of product usage, please feel
free to contact us or the dealer.
- The company reserves the authority to amend the specification.
Brief Introduction
With the increasing application of HD video equipment, many problems have
arisen in the wiring process, such as high wire cost and short service life.
If the on-site protection is not enough, the trampling of the passing crowd may
affect the performance of wire, and even cause a live broadcast accident.
This program provides a more convenient and safe solution for live video scenes.
Its long-distance transmission multi-frequency channel support, coupled with the
high-capacity lithium battery system, i.e., PNP configuration, can fully meet the
needs of various indoor and outdoor shooting, especially the feature of free
wiring, which will bring you a safer and more professional enjoyment.
Features
Suitable for portable HD video equipment with HDMI output such as video
cameras, cameras, etc.;
Instant display of working status (transmit channel, network status,
and video status);
Support DC power supply: power adapter 12V, wide voltage range of emergency
power supply (7V ~ 36V) or install lithium battery;
(SONY NP-F970 and compatible series batteries), internal protection design to
prevent reverse power connection;
The back structure is a lithium battery card holder for installing SONY NP-F970
and compatible series batteries
Support "Hot Shoe" and 1/4" tapped hole mounting standard interface design
for easy transmitter mounting and fixation;
Internal and external audio switching, support for external microphone audio input;
01
Wireless transmission distance up to 800ft;
Support P frame / I frame adaptation to ensure ultra-low latency of
video transmission;
Support low-battery alarm function of the battery;
Full hardware design, no need to install software, PNP,
which is simple and convenient
Packing List
Please check the packing list carefully, if any parts is missed,
please contact your dealer. Components of all models are subject
to the following packing list.
TX:7072 *1
Antenna * 2
RX:3072 *1
Antenna * 2
* The adaptor may vary according to certain conditions in different country/region.
HDMI Cable*1
Hot-shoe Stand*1
DC Adapter
(12V/2A) * 1
HDMI Cable*1
02
Need help?
Do you have a question about the SWIFT 800 and is the answer not in the manual?