TP-Link TL-SG108PE Installation Manual

Installation Guide

8-Port Gigabit Easy Smart Switch with 4-Port PoE
TL-SG108PE
Connection
PoE Ports (1-4)
PoE Devices
IP Camera AP
Configuration
The switch is plug and play. To manage the switch, you can use the Web-based
GUI or the configuration utility.
Using the Web-based GUI
1. Find the IP address of the switch.
By default, the switch receives an IP addess from a DHCP server (or a router that
functions as a DHCP server) in your network. You can find this IP address on
the DHCP server.
If the switch cannot receive an IP address from a DHCP server, it uses the static
IP address of 192.168.0.1, with a subnet mask of 255.255.255.0.
2. Configure IP address on your PC to ensure the switch and PC are in the same subnet.
If the switch uses an IP address assigned by a DHCP server,
an IP address automatically from the DHCP server.
If the switch uses the static IP address of 192.168.0.1, configure your PC's IP
address as 192.168.0.x ("x" ranges from 2 to 254), and subnet mask as
255.255.255.0.
3. Launch a web browser on your PC. Enter the IP address of the switch in the address
bar and press Enter. Log in with admin
Now you can configure the switch using the Web-based GUI. For further information,
refer to the User Guide. Go to https://www.tp-link.com/support, search the model
number of your switch, and you can find this guide on the product
Note: If the switch gets a new IP address from the DHCP server, your connection to the
switch will be lost. Enter the new IP address in your browser to access the switch again.

Using the Configuration Utility

The utility is only supported on Windows so far. The utility is provided on the resource CD,
also you can dowload the utility from the official website: https://www.tp-link.com/support
The following instruction takes installing from the resource CD as an example.
IP Phone
set your PC to obtain
as both user name and password.
Support web page.
LED Explanation
Power
On: Power on
Off: Power off
Power
PoE Max
On: 46W ≤ Total power supply < 55W
Flashing: Total power supply = 55W
PoE Max
Off: Total power supply < 46W
DC Power Adapter
Ethernet Ports (1-8)
PC
Note: 1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. Maximum PoE power is 15.4W for each PoE port and 55W for all PoE ports.
1. Insert the resource CD into the PC.
2. The resource CD home screen will appear. If
not, double click AutoRun.exe
resource CD. Then click
Configuration Utility
and follow the prompts to install the program.
3. Double click the icon
and the utility home page
displays a list of TP-Link Easy Smart
Switches on the local network.
4. Make sure the switch that you want to manage is in the same subnet as your
computer. You can click
5. Double click the switch that you want to configure. Next enter the username and
password (both admin) for it.
Now you can configure the switch using the configuration utility.
For further information, refer to the
https://www.tp-link.com/support, search the model number of your switch, and you can
find this guide on the product
Link/Act and PoE Status
Link/Act (Port 1-8)
Green:
Yellow:
Flashing:
Off: No device is linked to
the corresponding port
PoE Status (Port 1-4)
On: Providing PoE power
Flashing:
Off: Not providing PoE power
AC Power Cord
Internet
Router
WAN Port
LAN Port
on the
Install Easy Smart
on the home screen
on the desktop,
to configure the switch IP address.
Easy Smart Configuration Utility User
Support web page.
Running at 1000Mbps
Running at 10/100Mbps
Transmitting/receiving data
PoE fault
Guide. Go to