Download Print this page
Singer 112-4 Parts List
Singer 112-4 Parts List

Singer 112-4 Parts List

The singer manufacturing co. sewing machines parts manual

Advertisement

Quick Links

Advertisement

loading
Need help?

Need help?

Do you have a question about the 112-4 and is the answer not in the manual?

Questions and answers

Cindy Irish
March 31, 2025

How to chance light bulb

1 comments:
Mr. Anderson
March 31, 2025

To change the light bulb on a Singer 112-4 sewing machine, follow these steps:

1. Turn off and unplug the machine: Always disconnect power before performing maintenance to avoid electric shock.

2. Locate the light bulb: The light is typically mounted under the arm of the machine, near the needle area.

3. Access the bulb: If there is a cover over the bulb, remove it by unscrewing or sliding it off, depending on the design.

4. Remove the old bulb: Let the bulb cool if recently used. Then, gently twist the bulb counterclockwise (if screw-type) or pull it straight out (if push-fit).

5. Install the new bulb: Insert the correct replacement bulb (check voltage and wattage specifications) and twist clockwise or push it in, depending on the type.

6. Reattach the cover: If there was a cover, reinstall it securely.

7. Plug in and test: Restore power and turn on the machine to ensure the new bulb works.

Always use the recommended bulb type for your specific machine model.

This answer is automatically generated