Table of Contents
Advertisement
Troubleshooting Checklist
No picture &
No sound
Picture OK &
No sound
The remote control
doesn't work
Picture appears slowly,
after switching on
No or Poor color
or Poor picture
Horizontal/vertical bars
or picture shaking
No output from one of
the speakers
Unusual sound from
inside the monitor
32 Plasma Display
• Check whether the Monitor is turned on.
• Power cord inserted into wall outlet?
• Test the wall power outlet, plug other product's power cord into the wall outlet
where the Monitor's power cord was plugged in.
G
• Press the VOLUME (
) button.
• Sound muted? Press MUTE button.
• Check to see if there is any object between the Plasma Display and the
remote control causing obstruction.
• Are batteries installed with correct polarity (+ to +, - to -)?
(Refer to p.11)
• Install new batteries. (Refer to p.11)
• This is normal as the image is muted during the startup process of the moni-
tor. Please contact your service centre,if the picture has not appeared after
five minutes.
• Select
COLOR
in the
PICTURE
(Refer to p.14)
• Keep a certain distance between the Monitor and the VCR.
• Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the screen gets dark.)
• Check for local interference such as an electrical appliance or power tool.
• Adjust
BALANCE
in the
SOUND
• A change in ambient humidity or temperature may result in an unusual noise
at the time of switching off or on of the monitor and does not indicate a fault
with the monitor.
menu and press the VOLUME (
menu. (Refer to p.15)
G
) button.
Advertisement
Table of Contents
