Evinrude E-Tec 40 HP Service Manual page 13

Minimum Battery
Requirements
Alternator
Tachometer Setting
Engine Fuse
Thermostat 14
Maximum Temperature
Water pressure
Type
Firing Order
Ignition Timing
RPM Limit in Gear
RPM Limit in Neutral
Crankshaft Position Sensor Air
Gap
Spark Plug
Gear Ratio
Lubricant
Capacity
Shift Rod Height
Shift Cable Stroke
Lubrication
Fluid Capacity
Trim Range
Tilt Range
40 – 65 HP E-TEC Models
640 CCA (800 MCA) or 800 CCA (1000 MCA) below 32° F (0° C)
25-Amp fully regulated. Refer to Predelivery and Installation Guide for multiple battery
Refer to Emission Control Information Label
†
QC10WEP @ 0.028 ± 0.003 in. (0.71 mm)
Champion
HPF Pro in high performance or commercial applications
20 in. (L) Models: 21.38 (543 mm) ± one-half turn
1.125 to 1.330 in. (28.6 to 33.8 mm) measured between NEUTRAL and FORWARD
Evinrude/Johnson Biodegradable TNT Fluid
REFERENCE INFORMATION
SERVICE SPECIFICATIONS
applications.
6 pulse (12 pole)
P/N 967545 – 10 A
3°F (62°C)
212°F (100°C)
12 to 14 psi @ 5000 RPM
Capacitor Discharge
1-2
EMM Controlled
6250
1800
Fixed
12:32 (.375)
HPF XR Gearcase Lube
22 fl. oz. (650 ml)
15.2 fl. oz. (450 ml)
0° to 15°
16° to 65°
1
11