5HFRUG DXGLR ÀOHV IURP &' WR 86%
<RX FDQ UHFRUG DXGLR ÀOHV IURP DQ DXGLR &' WR D 86% VWRUDJH GHYLFH $XGLR ÀOHV DUH UHFRUGHG LQ PS
Connect a USB storage device to this player.
Load a disc, and start disc play.
Press , and select [Create MP3], and then press OK.
Follow the on-screen instructions to complete an recording.
» A new folder is automatically created in the USB storage device to store all the recorded MP3
During recording, do not press any button.
DTS CDs and copy-protected CDs cannot be converted.
:ULWHSURWHFWHG RU SDVVZRUGSURWHFWHG 86% GHYLFHV FDQQRW EH XVHG WR VWRUH 03 ÀOHV
Use Philips EasyLink
This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control)
protocol. You can use a single remote control to control EasyLink compliant devices that are connected
through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices.
Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC
operations on the TV and other connected devices (see the user manual of the TV or other
devices for details).
Select [Setup]> [Video] > [HDMI Setup] > [EasyLink Setup].
Select [On] under the options: [EasyLink], [1 Touch Play] and [1 Touch Standby].
» EasyLink function is turned on.
One Touch Play
When you play a disc on this player, the TV automatically switches to the correct video input source.
One Touch Standby
When a connected device (for example TV) is put to standby with its own remote control, this player
is put to standby automatically.