Table of Contents
Advertisement
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.
IMPORTANT:
damaging the cable.
4.
Push the green release latch on the rear of the drive toward the center of the drive (3), and then slide
the drive forward and out of the front of the computer (4).
26
Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page
When removing the cables, pull the tab or connector instead of the cable itself to avoid
17)
16).
Advertisement
Table of Contents
