Simplicity Turbo Turbo Wide Body Cart & Hitch Operator's Manual
  1. Manuals
  2. Brands
  3. Simplicity Manuals
  4. Lawn Mower Accessories
  5. Turbo Turbo Wide Body Cart & Hitch
  6. Operator's manual
Simplicity Turbo Turbo Wide Body Cart & Hitch Operator's Manual

Simplicity Turbo Turbo Wide Body Cart & Hitch Operator's Manual

Turbo wide body cart & hitch
Hide thumbs
Table of Contents

Advertisement

Quick Links

ATTACHMENT
OPERATOR'S
MANUAL
Turbo
Wide Body Cart & Hitch
Mfg. No.
Description
1691526
Turbo Wide Body Cart & Hitch
(for SunStar / 1900 / 2900 Series & Sovereign / 900 / 2800 Series)
1692526
Turbo Wide Body Cart & Hitch
(for Landlord / 1700 / 2700 Series & Broadmoor / 1600 / 2600 Series)
1714467-01
Rev 11/97
TP 100-2126-01-AT-SMA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Turbo Turbo Wide Body Cart & Hitch and is the answer not in the manual?

Questions and answers

Related Manuals for Simplicity Turbo Turbo Wide Body Cart & Hitch

Summary of Contents for Simplicity Turbo Turbo Wide Body Cart & Hitch

  • Page 1 ATTACHMENT OPERATOR’S MANUAL Turbo Wide Body Cart & Hitch Mfg. No. Description 1691526 Turbo Wide Body Cart & Hitch (for SunStar / 1900 / 2900 Series & Sovereign / 900 / 2800 Series) 1692526 Turbo Wide Body Cart & Hitch (for Landlord / 1700 / 2700 Series &...
  • Page 2 M A N U F A C T U R I N G , I N C . 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA.

  • Page 3: Table Of Contents

    Inside Box Width...44” Inside Box Height ...7” Box Capacity...5 cu. ft. Weight Capacity ...400 lbs. Grass Capacity...17 bushels Pneumatic Tire Size...410/350 x 4 © Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved. TP 100-2126-01-AT-SMA DISCHARGE TUBE INSTALLATION...11 Landlord...11 Broadmoor ...11 SunStar...11...

  • Page 4: Illustrations & Part Lists

    Illustrations & Part Lists Figure 1. Wide Body Dump Cart Qty. Description COVER ROD, Straight CLIP, Safety, Hairpin SLEEVE, Plastic, Connecting CLAMP, Sleeve TUBE, Support HANDLE, Lift LOCKWASHER, 1/4 NUT, Hex, 1/4-20 NUT, Lock, 5/16-18 WASHER, Flat, 5/16 (1691367 & 1691358) WASHER, Flat, 5/16 (1691526 only) HANDLE, Latch...

  • Page 5: Tube Assembly (Sunstar & Sovereign)

    Figure 2. Tube Assembly - Sunstar & Sovereign Figure 3. Sunstar Hitch Figure 4. Sovereign Hitch Qty.Description Qty.Description Illustrations & Part Lists Clamp, 6” Hose Screw, Truss Hd. #10-32 x 1/2 Plain Washer Hex Nut #10-32 Tube Decal Capscrew, Hex Hd., 7/16-14 x 1-1/2 Lockwasher, 7/16 Nut, Hex, Full, 7/16 Nut, Hex, Full, 1/2-13...

  • Page 6: Tube Assembly (Landlord & Broadmoor)

    Illustrations & Part Lists Figure 5. Tube Assembly - Landlord & Broadmoor Figure 6. Hitch Assembly - Landlord A. Hitch Bracket B. Hitch Support E. Backside Drawbar F. Flat washer, 1/2 Figure 7. Hitch Assembly - Broadmoor A. Hitch Bracket B.

  • Page 7: Safety Rules

    WARNING Read these safety rules and the safety rules in your tractor Operator’s Manual and follow them closely. Failure to obey these rules could result in loss of control of the vehicle, sever personal injury to yourself, or damage to property or equipment.

  • Page 8: Cart Assembly

    Cart Assembly Figure 8. Wheel Assembly A. Wheel Assembly B. Frame CART ASSEMBLY 1. Install the wheel assemblies (A, Figure 8) to the frame (B). Place the head of the swivel wheel on the end of the frame. Align the holes and place four 3/8- 16 x 1 hex bolts up through the frame and head of the swivel.

  • Page 9: Cover Assembly

    Figure 12. Install Support Tube A. Support Tube 5. Install support tube (A, Figure 12) inside the box. Align each end of the support tube with the two holes at the front corner side of the box. Place one 5/16-18 x 1-1/2 hex bolt with a 5/16 flat washer and plastic spacer through the top, outside hole of the box and the support tube.
  • Page 10 Cover Assembly Figure 17. Install Connecting Sleeve A. Connecting Sleeve B. Support Tube C. Sleeve Clamp D. Truss Head Screw, 1/4-20 x 1/2 E. Nyloc Nut 6. Install the sleeve clamp (C, Figure 17) to the connect- ing sleeve (A) with 1/4-20 x 1/2 slotted truss head screw (D) and nyloc nut (E).

  • Page 11: Hitch Installation

    HITCH INSTALLATION SunStar/1900 Series (Mfg. No. 1691526) 1. Install the U-bracket (A, Figure 22) with two 1/2-13 x 1 1/4 capscrews (B), 1/2 lockwashers, and nuts. At top hole on each side, install two 7/16-14 x 1-1/2 cap screws (C), lockwashers and nuts. Note: The U-bracket (A, Figure 22) is an accessory hitch with additional ear for tiller attachment.

  • Page 12: Broadmoor

    Hitch Installation Broadmoor/1600 Series (Mfg. No. 1692526) 1. Assemble the hitch bracket (A, Figure 25) to the hitch adapters left (B) and right (C) with four 3/8-16 x 1 cap screws (D) and locknuts (E). 2. Position the hitch bracket over the drawbar (F) with the two hitch adapters on the outside of the drawbar frame (F).

  • Page 13: Discharge Tube Installation

    DISCHARGE TUBE INSTALLATION Landlord/1700 Series (Mfg. No. 1692526) Broadmoor/1600 Series (Mfg. No. 1692526) 1. Install the spring clip (D, Figure 26) with two 10/32 x 1/2 truss head screws (E), four flat washers (F), and two locknuts (G). 2. Install 1/4-20 x 5/8 carriage bolt (H) through hole in turbo housing.

  • Page 14: Connecting Cart To Tractor

    Connecting Cart / Maintenance CONNECTING CART TO TRACTOR Place the cart frame (A, Figure 28) onto tractor brackets and install the clevis pins (B) and springs clips (C). MAINTENANCE Cleaning Clear Tube To clean the clear mid-tube on the SunStar and Sovereign series collection systems, wash with warm water and mild soap or detergent.

  • Page 15: Operation

    OPERATION Before Operation Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Clean the tube with mild detergent (other products may damage tube). The flow of grass can be seen through the tube while mowing.

  • Page 16: Operating Without Collection System

    Operation Operating Without Collection System WARNING To operate without the collection system, the blower assembly must be removed and the deflector must be in down position. 1. Unhook the cart from the tractor by removing two cle- vis pins and spring clips (Figure 28). 2.

  • Page 17: Hardware Identification & Torque Specifications

    Hardware Identification & Torque Specifications Common Hardware Types Hex Head Capscrew Carriage Bolt Standard Hardware Sizing When a washer or nut is identified as 1/2”, this is the Nominal size , meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the Nominal size , or body diameter is 1/2 inch;...
  • Page 18 Notes...

This manual is also suitable for:

16915261692526

Table of Contents