Mitsubishi Electric MEsoftstart/I01 Users, Installation & Instruction Manual page 92

Table of Contents

Advertisement

'download' action to continue. If the password was activated on the soft starter, the correct password will be required to
download the configuration to the soft starter. Refer paragraph 6.4.8 for more information on the password.
The user may at any time revert to "Factory default" parameter set, or to the "Current Configuration" on the soft starter, or
may load "From File" a previously saved configuration. (Refer Figure 54).
Note that the default "File Path" where the configuration files are saved can be changed from the Home screen (refer Figure 46).
Configuring limits and tolerances using the MEsoftstart PC App
On the Core and the Pro variants:
The soft starter implements protection against over temperature on the motor and on the soft starter heat sinks, as well as
supply voltage and current unbalance. These parameters should not usually be changed, but are available to the advanced user
to adjust.
Note that the soft starter can control the internal fan to run whenever the motor is running. Or to start running when the heatsink
temperatures are above a limit – "Heatsink Fan Start Temperature".
92 MEsoftstart PC Interface Application
Figure 54 –Configure screen buttons

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents