Mitsubishi Electric MEsoftstart/I01 Users, Installation & Instruction Manual page 9

Table of Contents

Advertisement

Model MEsoftstart/I00 soft starter is rated at 100A continuous current and can be used at 240A starting current for normal duty
and at 125A starting current for heavy duty applications and can be ordered with a built-in bypass contactor or can be installed
with an external bypass contactor, or without a bypass contactor. MEsoftstart/I00 can be ordered for voltage ranges from 400Vac
to 690Vac and can be ordered with a built-in bypass contactor or can be installed with an external bypass contactor, or without
a bypass contactor.
Model:
Continuous rated current:
Max. starting current:
Max starting current:
Model MEsoftstart/I01 is rated at 200A continuous current and can be used at 480A starting current for normal duty and at
250A starting current for heavy duty applications. MEsoftstart/I01 can be ordered for voltage ranges from 400Vac to 690Vac and
can be ordered with a built-in bypass contactor or can be installed with an external bypass contactor, or without a bypass
contactor.
Model:
Continuous rated current:
Max. starting current:
Max starting current:
1
The tables show the allowable starting current for the listed motor sizes as a percentage of their maximum normal running current at
power factor of 0.8 – in the case of motors with heavy duty starting requirements, use only the values from columns marked "Heavy
duty".
9 Introduction
MEsoftstart/I00
100A
240A
Normal duty
125A
Heavy Duty
Table 1: MEsoftstart/I00 guideline for motor sizes
MEsoftstart/I01
200A
480A
Normal duty
250A
Heavy Duty
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents